The edges of your ArtResin canvas can look glossy and wrapped, clean and painted, sharply taped, repaired after curing, or hidden inside a frame. The best choice depends on whether you want the resin to become part of the side finish or whether you want the front surface to stay the focus. Plan the edge […]
To build a resin dam for thick pours, use a rigid temporary wall, cover every resin-facing surface with a release layer, seal the bottom edge and corners, then brace the wall so it cannot bow. Thick pours create more outward pressure than thin resin coatings, so tape alone is usually not enough except for very […]
Gold leaf works best in resin when you add it with control instead of dropping in large sheets. Mix and pour a thin first layer of resin, tear the leaf into small flakes or pieces, then place it gently into the wet resin with tweezers or a toothpick. Remove bubbles carefully, let the layer cure […]
Paint markers are a simple way to add lettering, outlines, metallic accents, borders, and small illustrations to cured resin art. The key is to use the right marker, work on fully cured resin, clean the surface well, let the paint dry completely, and seal it with a compatible clear coat. For resin projects, oil-based and […]
Resin markers work best on fully cured epoxy, not wet resin. For clean results, choose an oil-based paint marker, acrylic paint marker, or permanent marker based on the look you want, then clean and lightly prepare the surface before drawing. Always test the marker with your chosen sealer first, because some clear coats and fresh […]
Most ArtResin troubleshooting starts with three questions: did you measure accurately, did you mix thoroughly, and did the resin cure in the right conditions? If the surface is sticky, soft, cloudy, bubbly, dimpled, or uneven, do not rush into another pour. First, confirm whether the resin is fully cured. Then remove contamination, sand glossy cured […]
If you are comparing clear epoxy resins, choose the formula that gives you the longest clarity window for your actual project conditions. No epoxy resin is permanently immune to yellowing, but better art resin formulas resist discoloration longer through stronger UV stabilization, clearer raw materials, and a balanced hardener system. For buying decisions, do not […]
The Short Answer: the Search for Non-yellowing Epoxy Resin Continues All epoxy resin can yellow eventually. The better question is not “Which resin will never yellow?” but “Which resin will stay clear the longest for my project?” Yellowing happens faster when epoxy is exposed to UV light, heat, age, poor-quality ingredients, incorrect mixing, or colorants […]
A custom baby gift made with ArtResin is a polished keepsake that can display a baby’s name, birth date, weight, length, photo, nursery colors, or a small meaningful design. The simplest version is a sealed plaque, tile, or wood panel with printed baby details and a glossy clear resin coat. The key to a beautiful […]
Yes, you can resin an aluminum print. The key is to treat the metal print as a slick, finished surface that needs careful cleaning, leveling, and protection before epoxy goes on. A clear art resin coat can add gloss, depth, and a glass-like finish, but it will also permanently change the surface. The basic workflow […]